Astatic by CAD

Astatic by CAD Pro Audio > Microphones > Specialty Microphones >

Astatic by CAD Small Format Omnidirectional Dynamic Handheld Microphone with Switch.

The Astatic 651 is a small-format squeeze-to-talk, dynamic microphone for critical communications applications. The omnidirectional 651 mic has a tailored frequency response providing clear transmission and maximum intelligibility of speech. The microphone's housing is built to withstand rough mechanical impact while the transducer resists atmospheric extremes. The 651 microphone has a simple-to-operate DPDT long-life, trouble-free, leaf switch. It has a low-impedance output and is factory wired normally open. The 651 mic may be rewired in the field if a line shorting function is desired.The Astatic 651 mic is an excellent choice for any application requiring a small-format palm-held microphone for discrete or tight mounting spaces such as life-safety systems or paging stations where small size is required. The 651 microphone is also suited to most public address and general, multiple-use, commercial paging applications such as factories, airports, lobbies, restaurants, warehouses, etc.. ...details

Astatic by CAD

Astatic by CAD Omnidirectional Dynamic Desktop Microphone with Locking Switch.

This omnidirectional Astatic desktop microphone is a dual impedance, dynamic mic that offers modern styling and features in a rugged Cycolac housing. For all industrial and commercial public address and paging applications. A slight rise above 200 Hz gives the 878HL microphone a natural and highly intelligible sound. The 878HL mic offers a long-life DPDT leaf switch with three types of switch activation: a momentary push bar, a locking on/off switch, and lift-to-talk operation. The microphone's lift-to-talk operation can be disabled with a slide switch located under the microphone base.The Astatic Desktop Mic is manufactured to take abuse and retain its performance and appearance over a long life. Four molded, non-skid, non-marring, permanently resilient shock isolation feet are located under the base. The high or low impedance selector switch is located on the bottom of the microphone. The 878HL mic is supplied with a 7' four-conductor, two-shielded, cable wired normally open for relay control. If a line-shorting switch function is desired, the Astatic 878HL can be easily rewired in the field. The wide band frequency response is smooth and peak free.Impedance The Astatic Model 877HL is a dual impedance microphone. The high impedance position is 40,000 ohms and the low impedance is 400 ohms. The low impedance position is recommended for long cable length requirements. Cable lengths of 100' or more can be used in this position without loss of level or deterioration of high-frequency response. ...details

Astatic by CAD Pro Audio > Microphones > Specialty Microphones >

Astatic by CAD Noise-Canceling Omnidirectional Dynamic Handheld Microphone with Switch.

The Astatic Noise-Canceling microphone is designed for close talking, handheld applications in quality sound installations where background noise is a problem. The omnidirectional dynamic microphone's frequency response, especially tailored for voice communications, provides a crisp, clear, highly intelligible sound with 360° minimization of background noise. A soft lip-guard is positioned to assure proper close-talk voice spacing by the microphone's operator. The dynamic cartridge has a rugged polyester diaphragm that resists moisture, temperature extremes, most acids, alkalines, and solvents. Molded in high-impact Cycolac, the 631L microphone comes with a permanently attached, heavy-duty, four-conductor, two-shielded coil cord. The low impedance Astatic Noise-Canceling Microphone is simple to operate. A trouble-free DPDT long-life switch is factory-wired normally open.. ...details

Astatic by CAD Pro Audio > Microphones > Specialty Microphones >

Astatic by CAD Gooseneck Cardioid Extended Frequency Condenser Mic 20 In.

The Astatic 910B, 915B and 920B are low-noise, cardioid, condenser, mini-gooseneck microphones. They are ideal for use in houses of worship, government, corporate meeting rooms and public address. Their wide, smooth frequency response characteristics provide natural, articulate and transparent sound. The microphone's cardioid polar pattern minimizes annoying feedback when used close to sound reinforcement speakers and monitors, while reducing the pickup of unwanted off-axis sources. Their advanced, transformless electronics are self-contained to simplify installation.The Astatic 910B, 915B and 920B microphones include a solid center section with flexible goosenecks at the top and bottom. The top gooseneck is 1/4" [6mm] in diameter and the bottom gooseneck is 19/32" [8mm] in diameter. The 910B mic utilizes a single 1/4" [6mm] diameter gooseneck. The goosenecks are well-lubricated, silent in operation while maintaining strong positional memory. The overall length of the 910B is 10 15/16" [262mm], the 915B is 15 9/16" [395mm] and the 920B is 20 7/16" [519mm]. The durable matte-black non-reflective paint assures an unobtrusive installation. The foam windscreen is included. Standard P12, P24, or P48 phantom power is required.. ...details

Astatic by CAD Pro Audio > Microphones > Specialty Microphones >

Astatic by CAD Gooseneck Cardioid Extended Frequency Condenser Mic 15 In.

The Astatic 910B, 915B and 920B are low-noise, cardioid, condenser, mini-gooseneck microphones. They are ideal for use in houses of worship, government, corporate meeting rooms and public address. Their wide, smooth frequency response characteristics provide natural, articulate and transparent sound. The microphone's cardioid polar pattern minimizes annoying feedback when used close to sound reinforcement speakers and monitors, while reducing the pickup of unwanted off-axis sources. Their advanced, transformless electronics are self-contained to simplify installation.The Astatic 910B, 915B and 920B microphones include a solid center section with flexible goosenecks at the top and bottom. The top gooseneck is 1/4" [6mm] in diameter and the bottom gooseneck is 19/32" [8mm] in diameter. The 910B mic utilizes a single 1/4" [6mm] diameter gooseneck. The goosenecks are well-lubricated, silent in operation while maintaining strong positional memory. The overall length of the 910B is 10 15/16" [262mm], the 915B is 15 9/16" [395mm] and the 920B is 20 7/16" [519mm]. The durable matte-black non-reflective paint assures an unobtrusive installation. The foam windscreen is included. Standard P12, P24, or P48 phantom power is required.. ...details

Astatic by CAD Pro Audio > Microphones > Specialty Microphones >

Astatic by CAD Gooseneck Cardioid Extended Frequency Condenser Mic 10 In.

The Astatic 910B, 915B and 920B are low-noise, cardioid, condenser, mini-gooseneck microphones. They are ideal for use in houses of worship, government, corporate meeting rooms and public address. Their wide, smooth frequency response characteristics provide natural, articulate and transparent sound. The microphone's cardioid polar pattern minimizes annoying feedback when used close to sound reinforcement speakers and monitors, while reducing the pickup of unwanted off-axis sources. Their advanced, transformless electronics are self-contained to simplify installation.The Astatic 910B, 915B and 920B microphones include a solid center section with flexible goosenecks at the top and bottom. The top gooseneck is 1/4" [6mm] in diameter and the bottom gooseneck is 19/32" [8mm] in diameter. The 910B mic utilizes a single 1/4" [6mm] diameter gooseneck. The goosenecks are well-lubricated, silent in operation while maintaining strong positional memory. The overall length of the 910B is 10 15/16" [262mm], the 915B is 15 9/16" [395mm] and the 920B is 20 7/16" [519mm]. The durable matte-black non-reflective paint assures an unobtrusive installation. The foam windscreen is included. Standard P12, P24, or P48 phantom power is required.. ...details

Astatic by CAD Pro Audio > Microphones > Specialty Microphones >

Astatic by CAD AMC Omni Dynamic Microphone With Push-to-Talk Switch.

This Astatic microphone is from the AMC Series and is a push-button omnidirectional dynamic mic designed specially for fixed or gooseneck mounting in quality sound installations. The AMC1055NO microphones are extremely rugged and reliable and will stand up under the most strenuous handling conditions to provide years of dependable service. A smooth wide-band frequency response with a slight, intentional presence boost at 2000 Hz gives a natural, crisp, highly intelligible sound. All models are furnished with 5/8" 27-thread mounting and 7' of rugged synthetic jacketed four-conductor (two shielded) cable. Finished with a chrome-plated screen and black Cycolac cap and housing. 19" gooseneck.The AMC Series of gooseneck mounted, omnidirectional microphones are constructed of high-impact ABS Plastic and are excellent choices when cost-effective, rugged dependability and excellent intelligibility are required. Astatic's AMC mics are available with momentary switches for single- and dual-zone applications (dual zone operation requires an external relay for signal routing).. ...details

Astatic by CAD Pro Audio > Microphones > Specialty Microphones >

Astatic by CAD AMC Omni Dynamic Mic With Push-to-Talk Switches.

The Astatic AMC105-2 is a dual-zone omnidirectional microphone designed especially for fixed or gooseneck mounting in quality sound installations. A smooth, wide band frequency response with a slight presence boost at 2kHz, gives a natural, crisp, highly intelligible sound. Two DPDT sealed micro switches, with color-coded buttons for easy identification, permits paging in two areas, and an all-call feature is obtained by depressing both buttons simultaneously. The AMC105-2 microphone is extremely rugged and reliable, and will stand up under the most strenuous handling conditions to provide years of dependable service.The dynamic mic is supplied with 5/8" 27-thread mounting, 7' of rugged, synthetic jacketed four-conductor, two-shielded cable. Black Cycolac cap, chrome-plated screen and black Cycolac housing. A removable set screw is used to secure the front cap to the microphone housing and microphone to the gooseneck.. ...details

Astatic by CAD Pro Audio > Microphones > Specialty Microphones >

Astatic by CAD 900 Overhead Hanging Microphone White.

The Astatic 900 is a superior low noise, electret condenser cardioid choir microphone.The hanging microphone has a wide, flat frequency response which provides unsurpassed, natural, transparent sound quality. Its cardioid pickup pattern minimizes annoying feedback when used close to sound reinforcement speakers and monitors, while reducing the pickup of unwanted off axis sounds.The 900's electronics are located externally in a housing that also contains the professional three-pin male XLR connector. The Astatic 900 is attached to this with a 30' cable terminated with a mini three-pin XLR. It is finished in durable black urethane paint. The 900 mic features a .022"-diameter hole placed directly behind the microphone head that facilitates the use of monofilament line to inconspicuously fix the position of one or a series of microphones.. ...details

Astatic by CAD Pro Audio > Microphones > Specialty Microphones >

Astatic by CAD 900 Overhead Hanging Microphone Black.

The Astatic 900 is a superior low noise, electret condenser cardioid choir microphone.The hanging microphone has a wide, flat frequency response which provides unsurpassed, natural, transparent sound quality. Its cardioid pickup pattern minimizes annoying feedback when used close to sound reinforcement speakers and monitors, while reducing the pickup of unwanted off axis sounds.The 900's electronics are located externally in a housing that also contains the professional three-pin male XLR connector. The Astatic 900 is attached to this with a 30' cable terminated with a mini three-pin XLR. It is finished in durable black urethane paint. The 900 mic features a .022"-diameter hole placed directly behind the microphone head that facilitates the use of monofilament line to inconspicuously fix the position of one or a series of microphones.. ...details

Astatic by CAD Pro Audio > Microphones > Specialty Microphones >

Astatic by CAD 827A Gooseneck Cardioid Speech-Tailored Condenser Mic 17 In.

The Astatic 827A is a cost-effective, cardioid, mini-gooseneck, electret condenser microphone with a controlled low frequency roll-off, smooth mid-range, and slightly peaked upper range to give a natural sound in all applications requiring voice reproduction. The superior and uniform unidirectional pattern minimizes feedback, reverberation, off-axis coloration, background noise, and placement problems. The 827A microphone from Astatic has an extremely durable satin black finish and built-in circuitry for phantom powering. This unobtrusive gooseneck microphone is ruggedly constructed to provide years of dependable service. The 827A is supplied with a miniature windscreen to control wind noise and breath "pop" during close talk situation and an A3M connector at the equipment end of the gooseneck.. ...details

Astatic by CAD Pro Audio > Microphones > Specialty Microphones >

Astatic by CAD 827A Gooseneck Cardioid Speech-Tailored Condenser Mic 13 In.

The Astatic 827A is a cost-effective, cardioid, mini-gooseneck, electret condenser microphone with a controlled low frequency roll-off, smooth mid-range, and slightly peaked upper range to give a natural sound in all applications requiring voice reproduction. The superior and uniform unidirectional pattern minimizes feedback, reverberation, off-axis coloration, background noise, and placement problems. The 827A microphone from Astatic has an extremely durable satin black finish and built-in circuitry for phantom powering. This unobtrusive gooseneck microphone is ruggedly constructed to provide years of dependable service. The 827A is supplied with a miniature windscreen to control wind noise and breath "pop" during close talk situation and an A3M connector at the equipment end of the gooseneck.. ...details

Astatic by CAD Pro Audio > Microphones > Specialty Microphones >

Astatic by CAD 611L Omni Dynamic Handheld Microphone with Switch.

The 611L dynamic microphone is designed for palmheld communication. The frequency response, especially tailored for voice communications, provides a crisp, clear, highly intelligible sound. The 611L handheld mic, with modern tear drop styling, offers extreme reliability, convenient handling, rugged construction and high performance for years of dependable service. The dynamic cartridge has a strong polyester diaphragm that resists moisture, temperature extremes, most acids, alkalines, and solvents. Molded in high impact Cycolac, the Astatic 611L comes with a permanently attached, heavy-duty, four-conductor, double-shielded, coil cord. The low impedance 611L has a DPDT long life, trouble-free switch and is factory wired normally open.. ...details

Astatic by CAD Pro Audio > Microphones > Specialty Micropho

Astatic by CAD 202R Mini Omni Installation Boundary Microphone White.

The Astatic 202R microphones are miniature, high performance electret condenser microphones designed for low-profile mounting in panels, tables, or ceilings. They have been redesigned with improved RF immunity to greatly reduce susceptibility to radio interference from GSM based cell phones, PDA/cell phones, cell phones with walkie-talkie capability and other similar devices. They are excellent choices for teleconferencing, voice-lift, professional recording, courtrooms, surveillance and many other critical applications. The microphone is 1.1" in diameter at the largest point and mounts in a 13/16" opening in panels up to 2" thick. The 202Rs mics are extremely rugged and feature a solid machined brass body and Astatic Flex-FormTM hardened grille screens. It also has a built-in 80Hz, 12dB/octave high pass filter and are terminated with standard male 3-pin XLR connectors. Color-matched shockmount isolators are also included with each microphone. (15/16" mounting hole required when using shock isolators). It features self-contained low noise electronics and operate from standard P12, P24 and P48 phantom power. The front of the boundary microphone is located by the Astatic logo in the cut out section of the microphone bezel. The mic features an omnidirectional (half hemisphere above mounting surface) pickup which is useful when a directional pattern is not desired. No special orientation is required when mounting the 202R.. ...details

Astatic by CAD Pro Audio > Microphones > Specialty Micropho

Astatic by CAD 202R Mini Omni Installation Boundary Microphone Black.

The Astatic 202R microphones are miniature, high performance electret condenser microphones designed for low-profile mounting in panels, tables, or ceilings. They have been redesigned with improved RF immunity to greatly reduce susceptibility to radio interference from GSM based cell phones, PDA/cell phones, cell phones with walkie-talkie capability and other similar devices. They are excellent choices for teleconferencing, voice-lift, professional recording, courtrooms, surveillance and many other critical applications. The microphone is 1.1" in diameter at the largest point and mounts in a 13/16" opening in panels up to 2" thick. The 202Rs mics are extremely rugged and feature a solid machined brass body and Astatic Flex-FormTM hardened grille screens. It also has a built-in 80Hz, 12dB/octave high pass filter and are terminated with standard male 3-pin XLR connectors. Color-matched shockmount isolators are also included with each microphone. (15/16" mounting hole required when using shock isolators). It features self-contained low noise electronics and operate from standard P12, P24 and P48 phantom power. The front of the boundary microphone is located by the Astatic logo in the cut out section of the microphone bezel. The mic features an omnidirectional (half hemisphere above mounting surface) pickup which is useful when a directional pattern is not desired. No special orientation is required when mounting the 202R.. ...details

Astatic by CAD

Astatic by CAD 201R Mini Cardioid Installation Boundary Microphone White.

The Astatic 201R microphones are miniature, high performance electret condenser microphones designed for low-profile mounting in panels, tables, or ceilings. They have been redesigned with improved RF immunity to greatly reduce susceptibility to radio interference from GSM based cell phones, PDA/cell phones, cell phones with walkie-talkie capability and other similar devices. The microphone is an excellent choice for teleconferencing, voice-lift, professional recording, courtrooms, surveillance and many other critical applications.These Astatic mics are 1.1" in diameter at the largest point and mount in a 13/16" opening in panels up to 2" thick. The 201Rs are extremely rugged and feature a solid machined brass body and Astatic Flex-Form hardened grille screens. The microphone also has a built in 80Hz, 12dB/octave high-pass filter and are terminated with a standard male 3-pin XLR connector. Color-matched shockmount isolators are also included with each microphone. (15/16" mounting hole required when using shock isolators). 201Rs feature self-contained low noise electronics and operate from standard P12, P24 and P48 phantom power. The cardioid (half cardioid above mounting surface) pickup of the 201R pattern minimizes annoying feedback when used close to sound reinforcement speakers and monitors, while reducing the pickup of unwanted off axis sounds. The front of the microphone is located by the Astatic logo in the cut-out section of the microphone bezel.. ...details

Astatic by CAD

Astatic by CAD 201R Mini Cardioid Installation Boundary Microphone Black.

The Astatic 201R microphones are miniature, high performance electret condenser microphones designed for low-profile mounting in panels, tables, or ceilings. They have been redesigned with improved RF immunity to greatly reduce susceptibility to radio interference from GSM based cell phones, PDA/cell phones, cell phones with walkie-talkie capability and other similar devices. The microphone is an excellent choice for teleconferencing, voice-lift, professional recording, courtrooms, surveillance and many other critical applications.These Astatic mics are 1.1" in diameter at the largest point and mount in a 13/16" opening in panels up to 2" thick. The 201Rs are extremely rugged and feature a solid machined brass body and Astatic Flex-Form hardened grille screens. The microphone also has a built in 80Hz, 12dB/octave high-pass filter and are terminated with a standard male 3-pin XLR connector. Color-matched shockmount isolators are also included with each microphone. (15/16" mounting hole required when using shock isolators). 201Rs feature self-contained low noise electronics and operate from standard P12, P24 and P48 phantom power. The cardioid (half cardioid above mounting surface) pickup of the 201R pattern minimizes annoying feedback when used close to sound reinforcement speakers and monitors, while reducing the pickup of unwanted off axis sounds. The front of the microphone is located by the Astatic logo in the cut-out section of the microphone bezel.. ...details

Astatic by CAD Pro Audio > Mic

Astatic by CAD 119S Gooseneck Cardioid Dynamic Mic Push-to-Talk Switch.

The 119S is a dynamic cardioid microphone with a momentary push button switch, designed especially for gooseneck mounting in quality sound reinforcement and communication installations. A slightly rising high frequency response and a gentle low frequency roll-off, assure excellent voice reproduction. The 119S mic's superior cardioid directional pattern minimizes feedback, background noise, reverberation, off-axis coloration and placement problems. An internal vibration isolation system, consisting of a special rubber mounting ring as a support for the element, reduces gooseneck, stand and handling noise. An effective multi-stage blast filter controls breath pop and wind disturbances. The gooseneck mic has a high quality push-to-talk switch. The momentary push button switch is a double-pole, double-throw snap action type with gold-plated contacts. The microphone element is wired normally open. The push button switch also connects to an extra pair of leads in the cable for any additional switching requirements.The 119 Series microphones by Astatic feature all metal construction and are extremely rugged and reliable. They will stand up under the most strenuous handling conditions to provide years of dependable service. The 119 Series features balanced line wiring to allow use with long runs of cable without hum or noise pickup. The cable length for the 119S-19 is 5-1/2'. The 119S-19 is finished in satin chrome and includes a 20" chrome gooseneck and flange.. ...details

Astatic by CAD Pro Audio > Microphones > Specialty Microphones >

Astatic by CAD 119L Gooseneck Cardioid Dynamic Microphone.

The Astatic 119L is a dynamic cardioid microphone, designed especially for gooseneck mounting in quality sound reinforcement and communication installations. A slightly rising high-frequency response and a gentle low-frequency roll-off assure excellent voice reproduction. The mic's cardioid directional pattern minimizes feedback, background noise, reverberation, off-axis coloration and placement problems. An internal-vibration isolation system, consisting of a special rubber-mounting ring as a support for the element, reduces gooseneck, stand, and handling noise. The 119L microphone has an effective multi-stage blast filter controls breath pop and wind disturbances.This gooseneck mic by Astatic has a low-impedance output and is supplied with 5-1/2' of rugged two-conductor shielded cable. It's extremely rugged and reliable and will stand up under the most strenuous handling conditions to provide years of dependable service.. ...details