Sabine

Sabine Pro Audio > Signal Processors > Feedback Suppression >

Sabine FBX1200-U FBX Feedback Exterminator 2-Channel.

The performance-saving power of the Sabine FBX1200 with SMARTFilters lies in its ability to control feedback during the program, not just at setup time. If feedback occurs during that crucial moment of the show, in the middle of the big solo, or just when the worship leader begins the sermon, the FBX Feedback Exterminator places a filter that only kills the feedback, not the sound and power you work so hard to achieve. Think of the Sabine FBX as a very advanced set of automatic parametric filters. If you had the time, the filters, and the test equipment, you could find the feedback frequencies, dial in the precise filter location, and make a very narrow filter, just deep enough to remove the offending tone. The FBX1200 does it all for you automatically, and it does it faster than any other method. How does the Feedback Exterminator do it? First, let's consider just how a superior feedback control filter should behave. Filters can be described by their Speed, Accuracy, Resolution, and Sonic Integrity.Speed: The industry's best digital signal processors that run the SMARTFilter algorithm give the FBX1200 a distinct speed advantage over all other automatic feedback controllers. And in Setup Mode the speed is increased, so you can complete your entire setup of the FBX Feedback Exterminator in fewer than 30 seconds. During the show the 24-bit FBX1200 is constantly on the watch for feedback, never allowing it to ruin your show. Filters are placed almost immediately (in 0.4 seconds at 1 KHz).Accuracy: Is it music or is it feedback? This is the most difficult question your feedback controller must answer. A wrong decision means you waste filters (less gain for you) and punch unnecessary holes in your sound. The FBX1200 has always excelled in it's ability to make the right decision, and the new SMARTFilter technology makes it even better. Less sophisticated feedback controllers place filters on any loud tone, even if it is music, but the Sabine FBX1200 uses a patented analysis of the harmonic content of your program material. Because feedback is low in harmonics, and music and speech are rich in harmonics, the FBX1200 Feedback Exterminator is able to make the correct and accurate answer to the music or feedback question. Resolution: This is a big one. Now that we know feedback is happening, we need to target it precisely. Many feedback controllers place their filters in the general vicinity of the feedback and then widen the filters until the feedback goes away. The FBX1200 uses a more sophisticated solution. It centers the filter exactly on the frequency that is feeding back. This unique one-Hertz resolution enables the FBX1200 to control feedback with transparent filters that are ten times narrower than graphic equalizer filters, which can only muster 31 spots to place their very wide filters. Feedback frequencies are single tones, and that means there can be almost 20,000 places for them to occur in the audio spectrum. You can see that usin. ...details

Sabine Pro Audio > Signal Processors > Signal Routing >

Sabine Navigator System Processor 4X8.

The Sabine Navigator System Processor offers more choices for maximum flexibility. Choose your base model: full front panel control or blank front panel. Then choose your options: Microphone Preamps, Digital Audio I/O, or Wall Panel Remote Ready. All Navigators offer fast setup of your production audio rig, easy and secure configuration of your commercial or worship sound system, and complete signal routing for multi-room venues. Configure the Navigator to match your application and let it steer your way to a better sounding system.Unlimited DSP The Navigator Series is a complete multi-input/output digital system processor designed for commercial installation and production audio. Navigators use 32-bit (40-bit extended) floating point processors and high-performance 24-bit digital converters. All functions operate concurrently and are controlled simultaneously. There is no need to compile any files or settings, and the powerful Analog Devices SHARC processors handle the DSP processing. Best of all, you never run out of resources. All functions work together, so go ahead and set FBX feedback control filters on every input and compressors on every input and output — no problem.Navigator's blank front panel versions include Sabine's Automatic Mic Mixing function, with independent control of mic priority, attack, release, threshold, and gain on each channel. Combined with the FBX Feedback Exterminator the Navigator will provide more gain before feedback than conventional automatic mic mixers.Better Control As the name implies, the Navigator is all about control. The Navigator Remote Control software provides a heads-up display of all systems status and fast access to all parameters. This highly intuitive interface allows you to choose from two main views: Matrix or Mixer. The Mixer view is especially useful with the addition of the microphone preamps. If you can run a mixer, you can run this software.Equally powerful is the front panel control for those times when you need full access at the rack position. When integrating the Navigator as part of a larger system, choose USB, RS232, or Ethernet as your connection protocol. Serial and Ethernet-based touch screen control is also possible with all Navigators. The NAVRC-100 Wall Panel Remote is an attractive 2-gang remote control that is wired to the Navigator for trouble-free remote control. Programmable Menu and Value switches can be assigned to most of the Navigator functions, and the built-in, backlit LCD displays the name of each menu and preset. The Wall Panel Remote makes for a very powerful control system, and allows for multiple control points for multiple Navigators which can be mounted strategically throughout the installation.Superior Audio Quality One of the pioneers in the field of digital signal processing, Sabine's research and development into digital filtering technology provides an edge in both sound quality and reliability. The FBX Feedback Exterminator is one of the. ...details

Sabine Pro Audio > Signal Processors > Signal Routing >

Sabine Navigator System Processor 4X8 W/ Micpre.

The Sabine Navigator System Processor offers more choices for maximum flexibility. Choose your base model: full front panel control or blank front panel. Then choose your options: Microphone Preamps, Digital Audio I/O, or Wall Panel Remote Ready. All Navigators offer fast setup of your production audio rig, easy and secure configuration of your commercial or worship sound system, and complete signal routing for multi-room venues. Configure the Navigator to match your application and let it steer your way to a better sounding system.Unlimited DSP The Navigator Series is a complete multi-input/output digital system processor designed for commercial installation and production audio. Navigators use 32-bit (40-bit extended) floating point processors and high-performance 24-bit digital converters. All functions operate concurrently and are controlled simultaneously. There is no need to compile any files or settings, and the powerful Analog Devices SHARC processors handle the DSP processing. Best of all, you never run out of resources. All functions work together, so go ahead and set FBX feedback control filters on every input and compressors on every input and output — no problem.Navigator's blank front panel versions include Sabine's Automatic Mic Mixing function, with independent control of mic priority, attack, release, threshold, and gain on each channel. Combined with the FBX Feedback Exterminator the Navigator will provide more gain before feedback than conventional automatic mic mixers.Better Control As the name implies, the Navigator is all about control. The Navigator Remote Control software provides a heads-up display of all systems status and fast access to all parameters. This highly intuitive interface allows you to choose from two main views: Matrix or Mixer. The Mixer view is especially useful with the addition of the microphone preamps. If you can run a mixer, you can run this software.Equally powerful is the front panel control for those times when you need full access at the rack position. When integrating the Navigator as part of a larger system, choose USB, RS232, or Ethernet as your connection protocol. Serial and Ethernet-based touch screen control is also possible with all Navigators. The NAVRC-100 Wall Panel Remote is an attractive 2-gang remote control that is wired to the Navigator for trouble-free remote control. Programmable Menu and Value switches can be assigned to most of the Navigator functions, and the built-in, backlit LCD displays the name of each menu and preset. The Wall Panel Remote makes for a very powerful control system, and allows for multiple control points for multiple Navigators which can be mounted strategically throughout the installation.Superior Audio Quality One of the pioneers in the field of digital signal processing, Sabine's research and development into digital filtering technology provides an edge in both sound quality and reliability. The FBX Feedback Exterminator is one of the. ...details

Sabine Pro Audio > Signal Processors > Signal Routing >

Sabine Navigator System Processor 3X6.

The Sabine Navigator System Processor offers more choices for maximum flexibility. Choose your base model: full front panel control or blank front panel. Then choose your options: Microphone Preamps, Digital Audio I/O, or Wall Panel Remote Ready. All Navigators offer fast setup of your production audio rig, easy and secure configuration of your commercial or worship sound system, and complete signal routing for multi-room venues. Configure the Navigator to match your application and let it steer your way to a better sounding system.Unlimited DSP The Navigator Series is a complete multi-input/output digital system processor designed for commercial installation and production audio. Navigators use 32-bit (40-bit extended) floating point processors and high-performance 24-bit digital converters. All functions operate concurrently and are controlled simultaneously. There is no need to compile any files or settings, and the powerful Analog Devices SHARC processors handle the DSP processing. Best of all, you never run out of resources. All functions work together, so go ahead and set FBX feedback control filters on every input and compressors on every input and output — no problem.Navigator's blank front panel versions include Sabine's Automatic Mic Mixing function, with independent control of mic priority, attack, release, threshold, and gain on each channel. Combined with the FBX Feedback Exterminator the Navigator will provide more gain before feedback than conventional automatic mic mixers.Better Control As the name implies, the Navigator is all about control. The Navigator Remote Control software provides a heads-up display of all systems status and fast access to all parameters. This highly intuitive interface allows you to choose from two main views: Matrix or Mixer. The Mixer view is especially useful with the addition of the microphone preamps. If you can run a mixer, you can run this software.Equally powerful is the front panel control for those times when you need full access at the rack position. When integrating the Navigator as part of a larger system, choose USB, RS232, or Ethernet as your connection protocol. Serial and Ethernet-based touch screen control is also possible with all Navigators. The NAVRC-100 Wall Panel Remote is an attractive 2-gang remote control that is wired to the Navigator for trouble-free remote control. Programmable Menu and Value switches can be assigned to most of the Navigator functions, and the built-in, backlit LCD displays the name of each menu and preset. The Wall Panel Remote makes for a very powerful control system, and allows for multiple control points for multiple Navigators which can be mounted strategically throughout the installation.Superior Audio Quality One of the pioneers in the field of digital signal processing, Sabine's research and development into digital filtering technology provides an edge in both sound quality and reliability. The FBX Feedback Exterminator is one of the. ...details

Sabine Pro Audio > Signal Processors > Equalizers >

Sabine Graphi-Q2 Multi-Function EQ 1X2.

The GRQ2 combines eight indispensable audio products into one very affordable, all-digital package - with an easy-to-use hands-on interface. With the touch of a fader you can shape your frequency response using the GRQ2's 31-band digital graphic EQ. Need more control? Use the parametric EQ to control your filter width, depth and frequency. Time-align your speakers with the digital delay. Manage your system gain with the GRQ2 digital compressor/limiter. Finally, add 3 to 9 dB of extra gain and automatic feedback control with Sabine's patented FBX technology.This interface has an instant hands-on, front panel control. RS-232 remote computer control, 20 onboard program memories, and remote switching via contact closures are standard. A high level of control and superb audio quality at a low price.No Limits on DSP Power. You will never run out of DSP power because all GRQ2 functions run concurrently. Set as many filters as you need, and add as much gain management and delay as the job requires. There are no meters showing DSP usage, because you will never run out of power.Sabine's 24-bit A/D and D/A give the cleanest audio possible, and Analog Devices' 32-bit floating-point SHARC digital processor powers every GRQ2, allowing simultaneous use of these eight essential functions:31-band digital grahic EQ, with 6 or 12 dB range Patented FBX Feedback Exterminator: up to 12 new FBX SmartFilters with Quick & Quiet Setup Mode Parametric Filters, up to 12 with full graphic editing High- and low-cut filters Crossover: 1x2, with Bessel, Linkwitz-Reily, and Butterworth filters, slopes to 48 dB Limiter: Full-featured, including hard limiting for speaker protection Compressor: Full-featured, switchable to stereo or mono Delay: up to 1 second delay, adjustable in 20 microsecond incrementsUpgraded Graphi-Q2 Features: Crossover: Perfect for speaker control in mains and monitors Mixed control for the front panel: Selectively enable control for each function on the front panel GRQ2 Remote Software: Compatible with all versions of Graphi-Qs Channel-specific preset save and recall: Create presets to apply to either channel, or both Graphic Editing of Parametric Filters: Real-time filter drawing GRQ2 Remote Software: Compatible with all versions of Graphi-QsFlexible Control Front panels: The GRQ-3122 provides a hands-on, "analog style" front panel control for your digital graphic EQ, high- and low-cut filters, FBX, Compressor, and Delay. Sabine's Tweek 'n' Peek gives you an instant readout of your every move on the front panel.The GRQ2 digital delay provides precise speaker alignment, with 20-microsecond resolution, at the touch of a button. And you get dedicated bypass switches for FBX, EQ and Delay with built-in LED indicators.Sabine's GRQ2 Remote Control Software gives you instant access to all front panel controls and to an additional layer of functions. You can view and edit frequency response curves, view edits before execut. ...details

Sabine Pro Audio > Signal Processors > Signal Routing >

Sabine Navigator System Processor 3X6 W/ Micpre.

The Sabine Navigator System Processor offers more choices for maximum flexibility. Choose your base model: full front panel control or blank front panel. Then choose your options: Microphone Preamps, Digital Audio I/O, or Wall Panel Remote Ready. All Navigators offer fast setup of your production audio rig, easy and secure configuration of your commercial or worship sound system, and complete signal routing for multi-room venues. Configure the Navigator to match your application and let it steer your way to a better sounding system.Unlimited DSP The Navigator Series is a complete multi-input/output digital system processor designed for commercial installation and production audio. Navigators use 32-bit (40-bit extended) floating point processors and high-performance 24-bit digital converters. All functions operate concurrently and are controlled simultaneously. There is no need to compile any files or settings, and the powerful Analog Devices SHARC processors handle the DSP processing. Best of all, you never run out of resources. All functions work together, so go ahead and set FBX feedback control filters on every input and compressors on every input and output — no problem.Navigator's blank front panel versions include Sabine's Automatic Mic Mixing function, with independent control of mic priority, attack, release, threshold, and gain on each channel. Combined with the FBX Feedback Exterminator the Navigator will provide more gain before feedback than conventional automatic mic mixers.Better Control As the name implies, the Navigator is all about control. The Navigator Remote Control software provides a heads-up display of all systems status and fast access to all parameters. This highly intuitive interface allows you to choose from two main views: Matrix or Mixer. The Mixer view is especially useful with the addition of the microphone preamps. If you can run a mixer, you can run this software.Equally powerful is the front panel control for those times when you need full access at the rack position. When integrating the Navigator as part of a larger system, choose USB, RS232, or Ethernet as your connection protocol. Serial and Ethernet-based touch screen control is also possible with all Navigators. The NAVRC-100 Wall Panel Remote is an attractive 2-gang remote control that is wired to the Navigator for trouble-free remote control. Programmable Menu and Value switches can be assigned to most of the Navigator functions, and the built-in, backlit LCD displays the name of each menu and preset. The Wall Panel Remote makes for a very powerful control system, and allows for multiple control points for multiple Navigators which can be mounted strategically throughout the installation.Superior Audio Quality One of the pioneers in the field of digital signal processing, Sabine's research and development into digital filtering technology provides an edge in both sound quality and reliability. The FBX Feedback Exterminator is one of the. ...details

Sabine Pro Audio > Signal Processors > Signal Routing >

Sabine Navigator System Processor 2X4 W/ Micpre.

The Sabine Navigator System Processor offers more choices for maximum flexibility. Choose your base model: full front panel control or blank front panel. Then choose your options: Microphone Preamps, Digital Audio I/O, or Wall Panel Remote Ready. All Navigators offer fast setup of your production audio rig, easy and secure configuration of your commercial or worship sound system, and complete signal routing for multi-room venues. Configure the Navigator to match your application and let it steer your way to a better sounding system.Unlimited DSP The Navigator Series is a complete multi-input/output digital system processor designed for commercial installation and production audio. Navigators use 32-bit (40-bit extended) floating point processors and high-performance 24-bit digital converters. All functions operate concurrently and are controlled simultaneously. There is no need to compile any files or settings, and the powerful Analog Devices SHARC processors handle the DSP processing. Best of all, you never run out of resources. All functions work together, so go ahead and set FBX feedback control filters on every input and compressors on every input and output — no problem.Navigator's blank front panel versions include Sabine's Automatic Mic Mixing function, with independent control of mic priority, attack, release, threshold, and gain on each channel. Combined with the FBX Feedback Exterminator the Navigator will provide more gain before feedback than conventional automatic mic mixers.Better Control As the name implies, the Navigator is all about control. The Navigator Remote Control software provides a heads-up display of all systems status and fast access to all parameters. This highly intuitive interface allows you to choose from two main views: Matrix or Mixer. The Mixer view is especially useful with the addition of the microphone preamps. If you can run a mixer, you can run this software.Equally powerful is the front panel control for those times when you need full access at the rack position. When integrating the Navigator as part of a larger system, choose USB, RS232, or Ethernet as your connection protocol. Serial and Ethernet-based touch screen control is also possible with all Navigators. The NAVRC-100 Wall Panel Remote is an attractive 2-gang remote control that is wired to the Navigator for trouble-free remote control. Programmable Menu and Value switches can be assigned to most of the Navigator functions, and the built-in, backlit LCD displays the name of each menu and preset. The Wall Panel Remote makes for a very powerful control system, and allows for multiple control points for multiple Navigators which can be mounted strategically throughout the installation.Superior Audio Quality One of the pioneers in the field of digital signal processing, Sabine's research and development into digital filtering technology provides an edge in both sound quality and reliability. The FBX Feedback Exterminator is one of the. ...details

Sabine Pro Audio > Signal Processors > Signal Routing >

Sabine Navigator System Processor 2X4.

The Sabine Navigator System Processor offers more choices for maximum flexibility. Choose your base model: full front panel control or blank front panel. Then choose your options: Microphone Preamps, Digital Audio I/O, or Wall Panel Remote Ready. All Navigators offer fast setup of your production audio rig, easy and secure configuration of your commercial or worship sound system, and complete signal routing for multi-room venues. Configure the Navigator to match your application and let it steer your way to a better sounding system.Unlimited DSP The Navigator Series is a complete multi-input/output digital system processor designed for commercial installation and production audio. Navigators use 32-bit (40-bit extended) floating point processors and high-performance 24-bit digital converters. All functions operate concurrently and are controlled simultaneously. There is no need to compile any files or settings, and the powerful Analog Devices SHARC processors handle the DSP processing. Best of all, you never run out of resources. All functions work together, so go ahead and set FBX feedback control filters on every input and compressors on every input and output — no problem.Navigator's blank front panel versions include Sabine's Automatic Mic Mixing function, with independent control of mic priority, attack, release, threshold, and gain on each channel. Combined with the FBX Feedback Exterminator the Navigator will provide more gain before feedback than conventional automatic mic mixers.Better Control As the name implies, the Navigator is all about control. The Navigator Remote Control software provides a heads-up display of all systems status and fast access to all parameters. This highly intuitive interface allows you to choose from two main views: Matrix or Mixer. The Mixer view is especially useful with the addition of the microphone preamps. If you can run a mixer, you can run this software.Equally powerful is the front panel control for those times when you need full access at the rack position. When integrating the Navigator as part of a larger system, choose USB, RS232, or Ethernet as your connection protocol. Serial and Ethernet-based touch screen control is also possible with all Navigators. The NAVRC-100 Wall Panel Remote is an attractive 2-gang remote control that is wired to the Navigator for trouble-free remote control. Programmable Menu and Value switches can be assigned to most of the Navigator functions, and the built-in, backlit LCD displays the name of each menu and preset. The Wall Panel Remote makes for a very powerful control system, and allows for multiple control points for multiple Navigators which can be mounted strategically throughout the installation.Superior Audio Quality One of the pioneers in the field of digital signal processing, Sabine's research and development into digital filtering technology provides an edge in both sound quality and reliability. The FBX Feedback Exterminator is one of the. ...details

Sabine Accessories > Practice and Performance Aids > Tuners and Metronomes > Tuners >

Sabine STX1100 Chromatic AutoTuner.

The Sabine STX-1100 Auto Tuner offers handsfree operation, 7-octave range, jacks for in-line use, built-in mic, fast note recognition, easy-to-read LEDs with flat/sharp indicators that blink more slowly as you approach pitch, and a special power management feature that makes batteries last longer. Can be instantly recalibrated for nonstandard tunings. Sabine includes a 2-year limited warranty with the STX-1100 Auto Tuner.. ...details

Sabine Accessories > Practice and Performance Aids > Tuners and Metronomes > Metronomes >

Sabine Zipbeat-6000 Digital Metronome.

Sabine incorporates digital circuitry into the Zipbeat-600 Digital Metronome that assures perfect beat rate accuracy. The Zipbeat's loud, clear tone makes practicing easy with any musical instrument. Bright, multifunction display gives you visual beat cues and you can switch from 2 alternating LEDs to 8 LEDs that sweep back and forth. Includes a built-in pitch pipe, earphone, and 9V battery.. ...details

Sabine Accessories > Practice and Performance Aids > Tuners and Metronomes > Tuner and Metronome Combos >

Sabine MetroTune MT-9000.

The Sabine MetroTune MT-9000 is a chromatic auto tuner, advanced metronome, and tone generator in one! Large format LCD gives you a very accurate simulated needle display along with a 3-color LED tuning display. Woodblock-sounding metronome has a continuous volume control and includes 3 modes: standard, accented downbeat, and 5 useful rhythm figures (duplet, triplet, etc.). The tone generator is perfect for ear training or as another tuning aid. The best tuning and timing technology at the best price.. ...details

Sabine Guitars > Guitar Amplifiers and Effects > Guitar Amplifiers > Footswitches >

Sabine RT-Ped2 Footswitch for Rackmount Tuners.

The RT-Ped2 is a 2-button footswitch for Sabine RT7000 Series rackmount tuners.. ...details

Sabine Pro Audio > Signal Processors > Signal Routing >

Sabine NAV4800 Navigator System Processor 4-in, 8-out With Ethernet Option.

The NAV4800 multi-function DSP unit from Sabine offers full control and fast setup of your production audio rig, easy configuration and secure installation of your commercial PA sound system, and complete signal routing for multi-room venues-all with Sabine's superior DSP algorithms and robust hardware platform. The NAV4800 is a complete 4 in/8 out digital system processor. 32-bit (40-bit extended) floating point processors and high-performance 24-bit digital converters represent the latest in signal processing technology.Navigator Remote Control software provides a heads-up status display of all systems and fast access to all parameters. Equally powerful is the front panel control when you need full access at the rack position.The FBX Feedback Exterminator is one of many innovations Sabine incorporated into the NAV4800. All DSP functions, including equalization, level control, delay, polarity, routing, multiple crossover selections, and gain management. Industry-standard Analog Devices SHARC processors handle the DSP processing.Free firmware and software upgrades are easily done by connecting to Sabine's website. Keep your NAV4800 current with newly developed algorithms and functions. Flexible save and recall functions and complete system security round out this rugged unit.. ...details

Sabine Pro Audio > Signal Processors > Signal Routing >

Sabine NAV4800 Navigator System Processor 4-in, 8-out Frequency 169.505.

The NAV4800 multi-function DSP unit from Sabine offers full control and fast setup of your production audio rig, easy configuration and secure installation of your commercial PA sound system, and complete signal routing for multi-room venues-all with Sabine's superior DSP algorithms and robust hardware platform. The NAV4800 is a complete 4 in/8 out digital system processor. 32-bit (40-bit extended) floating point processors and high-performance 24-bit digital converters represent the latest in signal processing technology.Navigator Remote Control software provides a heads-up status display of all systems and fast access to all parameters. Equally powerful is the front panel control when you need full access at the rack position.The FBX Feedback Exterminator is one of many innovations Sabine incorporated into the NAV4800. All DSP functions, including equalization, level control, delay, polarity, routing, multiple crossover selections, and gain management. Industry-standard Analog Devices SHARC processors handle the DSP processing.Free firmware and software upgrades are easily done by connecting to Sabine's website. Keep your NAV4800 current with newly developed algorithms and functions. Flexible save and recall functions and complete system security round out this rugged unit.. ...details

Sabine Pro Audio > Signal Processors > Signal Routing >

Sabine NAV8800 Navigator System Processor 8-in, 8-out Without Ethernet Option.

The NAV8800 multi-function DSP unit from Sabine offers full control and fast setup of your audio production rig, easy configuration and secure installation of your commercial or worship sound system, and complete signal routing for multi-room venues-all with Sabine's superior DSP algorithms and robust hardware platform.The NAV8800 is a complete 8 in/8 out digital system processor. 32-bit (40-bit extended) floating point processors and high-performance 24-bit digital converters represent the latest in signal processing technology.Navigator Remote Control software provides a heads-up status display of all systems and fast access to all parameters. Equally powerful is the front panel control when you need full access at the rack position.The FBX Feedback Exterminator is one of many innovations Sabine incorporated into the NAV8800. All DSP functions, including equalization, level control, delay, polarity, routing, multiple crossover selections, and gain management. Industry-standard Analog Devices SHARC processors handle the DSP processing.Free firmware and software upgrades are easily done by connecting to Sabine's website. Keep your NAV8800 current with newly developed algorithms and functions. Flexible save and recall functions and complete system security round out this rugged unit.. ...details

Sabine Pro Audio > Signal Processors > Feedback Suppression >

Sabine FBX SOLO SL820 Digital Feedback Eliminator 1/4.

Let's make this loud and clear: You want more gain? Increased clarity? Automatic feedback control? Want to save some money? Sabine has the answer: The FBX-SOLO Feedback Eliminator, a miniature version of the award-winning FBX-1020P Feedback Exterminator. One SOLO controls feedback on one microphone or instrument - you decide which inputs get precision, automatic feedback control and maximum gain, from one channel to all your channels. Features of the SOLOs include increased headroom, a programmable noise gate, & switchable input/output levels for more versatility.The FBX-SOLO SL820 provides 1/4" I/O for use with acoustic-electric guitars, which tend to be prone to feedback at high stage levels. The SL820 lets you get the most out of your sound while performing at hotter levels. The FBX-SOLO targets feedback without taking a big chunk out of your sound. Digital FBX filters are 10 times narrower than graphic EQ filters. You get back over 90% of the power you lose with a graphic EQ.Like all the FBX Feedback Exterminators, the FBX-SOLO does what no other audio product can do: it automatically detects and eliminates feedback while leaving the sound crystal clear. The patented algorithm distinguishes music from feedback so it works even during the program, not just at setup time.If you use your 31-band EQ just to shape your sound and let your FBX control feedback, you should expect up to 9 dB more gain and a dramatic improvement in the sound quality. Why? When you pull down a graphic EQ slider to chase feedback, you also pull out a big chunk of your sound. FBX constant-Q filters are 10 times narrower than graphic EQ filters. Narrow filters mean more gain and more clarity. It's that simple.The perfect solution for wireless mics Using the FBX-SOLO with a wireless mic, you'll be able to move freely without worrying about feedback. Patch it in your monitors and they'll be so loud you may have to turn them down. Get the volume you want with your acoustic/electric instrument or harmonica mic and keep that rich tone. And the built-in noise gate provides the control you need in multi-mic locations like conference rooms and courthouses. Wherever you have an open microphone, the FBX is the most effective and least expensive way to make a dramatic improvement in your sound system.How It Works: Precisely detects feedback frequency Places super-narrow (1/10 octave) digital filter directly on feedback Sets filter just deep enough to remove feedbackWhat You Get: More gain... for the first time you'll have to turn down the monitors! Increased clarity and intelligibility - narrow filters get the feedback and leave your sound untouched Automatic feedback control - in setup and during the performance Targeted feedback control - aim the FBX where you need it mostWhich SOLO for you? This SL820 features 1/4" TRS I/O connectors, unbalanced >1 meg Ohm input impedance, +20 dBV maximum input/output level at lowest gain, a 0 to +35 dB (high in), +30. ...details

Sabine Pro Audio > Signal Processors > Signal Routing >

Sabine NAV8800 Navigator System Processor 8-in, 8-out With Ethernet Option.

The NAV8800 multi-function DSP unit from Sabine offers full control and fast setup of your audio production rig, easy configuration and secure installation of your commercial or worship sound system, and complete signal routing for multi-room venues-all with Sabine's superior DSP algorithms and robust hardware platform.The NAV8800 is a complete 8 in/8 out digital system processor. 32-bit (40-bit extended) floating point processors and high-performance 24-bit digital converters represent the latest in signal processing technology.Navigator Remote Control software provides a heads-up status display of all systems and fast access to all parameters. Equally powerful is the front panel control when you need full access at the rack position.The FBX Feedback Exterminator is one of many innovations Sabine incorporated into the NAV8800. All DSP functions, including equalization, level control, delay, polarity, routing, multiple crossover selections, and gain management. Industry-standard Analog Devices SHARC processors handle the DSP processing.Free firmware and software upgrades are easily done by connecting to Sabine's website. Keep your NAV8800 current with newly developed algorithms and functions. Flexible save and recall functions and complete system security round out this rugged unit.. ...details

Sabine Pro Audio > Signal Processors > Microphone Preamps >

Sabine Phantom Mic Rider - Handheld w/ built in IR Sensor.

Elegant and simple, the Sabine Phantom Mic Rider is a real breakthrough in microphone technology. The key is phantom-powered DSP—a first in the industry. Your DSP processing is now customizable and physically located at each microphone. Think of the applications: retrofit every podium mic at your church, school, boardroom, or teleconferencing center. Get one of these accessories on every mic you specify.The Phantom Microphone Rider delivers benefits for everyone involved with your sound system. Whether they are loud talkers or meek mumblers, all your presenters will appreciate the consistent sound quality and managed gain provided by the Phantom. The technicians will love the fast and easy installation and setup, and they can leave the mic unattended, knowing the adaptive functions of the Phantom's sensor will take care of feedback, gain, and clarity. The Phantom even turns the mic off when no one is in front of it using the included, detachable infrared sensor. The audience will appreciate the clear sound and increased intelligibility, and your accounting department will love the price.Getting a Sabine Phantom is like having an engineer in every microphone who manages the gain, drops in parametric filters to kill feedback, tweaks the EQ when the speaker gets too close, edits out the plosive sounds without affecting the audio, and turns the mic off if no one is near it. With all these features in one small package, all for such a great price, you can afford to put one on every mic in your system.Installing and setting up your Phantom is extraordinarily easy. Just insert the Phantom between the mic's base (or podium if the mic is flush mounted) and the connector on your gooseneck mic. The installation is done. The controls (hidden beneath the security cover) will allow you to make a few adjustments to customize the Phantom for each situation. Set the Sabine Phantom for your mic's sensitivity, then set your FBX filters and tweak the proximity and plosive controls if necessary. The whole process will take a minute or two, and you are ready to go. The Phantom's DSP will always be there improving your sound. It's like having an engineer in every mic.The Phantom Mic Rider works with 17V to 48V phantom power sources that conform to industry standards (DIN standard 45 596 or IEC standard 268-15A). Devices that do not conform can be modified to meet the standard, or external phantom power supplies can be used.. ...details

Sabine Pro Audio > Signal Processors > Microphone Preamps >

"Sabine Phantom Mic Rider - Gooseneck & Podium w/ 12" IR Sensor Cable".

Elegant and simple, the Sabine Phantom Mic Rider is a real breakthrough in microphone technology. The key is phantom-powered DSP - a first in the industry. Your DSP processing is now customizable and physically located at each microphone. Think of the applications: retrofit every podium mic at your church, school, boardroom, or teleconferencing center. Get one of these accessories on every mic you specify from now on!The Phantom Mic Rider delivers benefits for everyone involved with your sound system. Whether loud talkers or meek mumblers, all your presenters will appreciate the consistent sound-quality and managed gain provided by the Phantom. The technicians will love the fast and easy installation and setup, and they can leave the mic unattended, knowing the adaptive functions of the Phantom will take care of feedback, gain, and clarity. The Sabine Phantom even turns the mic off when no one is in front of it using the included, detachable infrared sensor. The audience will appreciate the clear sound and increased intelligibility, and your accounting department will love the price.Getting a Phantom Mic Rider is like having an engineer in every microphone who manages the gain, drops in parametric filters to kill feedback, tweaks the EQ when the speaker gets too close, edits out the plosive sounds without affecting the audio, and turns the mic off if no one is near it. With all these features in one small package, all for such a great price, you can afford to put one on every mic in your system.Installing and setting up your Phantom is extraordinarily easy. Just insert the Phantom Mic Rider between the mic's base (or podium if the mic is flush mounted) and the connector on your gooseneck mic. The installation is done. The controls (hidden beneath the security cover) will allow you to make a few adjustments to customize the Phantom for each situation. Set the Sabine Phantom for your microphone's sensitivity, then set your FBX filters and tweak the proximity and plosive controls if necessary. The whole process will take just a minute or two, and you are ready to go. The Phantom's DSP will always be there improving your sound. It's like having an engineer in every mic!The Phantom Mic Rider works with 17 to 48V phantom power sources that conform to industry standards (DIN standard 45 596 or IEC standard 268-15A). Devices that do not conform can be modified to meet the standard, or external phantom power supplies can be used.. ...details

Sabine Pro Audio > Signal Processors > Microphone Preamps >

"Sabine Phantom Mic Rider - Gooseneck & Podium w/ 18" IR Sensor Cable".

Elegant and simple, the Sabine Phantom Mic Rider is a real breakthrough in microphone accessories. The key is phantom-powered DSP-a first in the industry. Your DSP processing is now customizable and physically located at each microphone. Think of the applications for custom microphone equalization: retrofit every podium mic at your church, school, boardroom, or teleconferencing center. Get one on every mic you specify from now on!The Phantom Mic Rider delivers benefits for everyone involved with your sound system. Whether they are loud talkers or meek mumblers, all your presenters will appreciate the consistent sound quality and managed gain provided by the Sabine Phantom. The technicians will love the fast and easy installation and setup, and they can leave the microphone unattended, knowing the adaptive functions of the Phantom will take care of feedback, gain, and clarity. The Phantom even turns the mic off when no one is in front of it using the included, detachable infrared sensor. The audience will appreciate the clear sound and increased intelligibility, and your accounting department will love the price.Getting a Phantom Mic Rider is like having an engineer in every microphone who manages the gain, drops in parametric filters to kill feedback, tweaks the EQ when the speaker gets too close, edits out the plosive sounds without affecting the audio, and turns the mic off if no one is near it. With all these features in one small package, all for such a great price, you can afford to put one on every mic in your system.Installing and setting up your Sabine Phantom is extraordinarily easy. Just insert the Phantom between the mic's base (or podium if the mic is flush mounted) and the connector on your gooseneck mic. The installation is done. The controls (hidden beneath the security cover) will allow you to make a few adjustments to customize the Phantom for each situation. Set the Phantom for your microphone's sensitivity, then set your FBX filters and tweak the proximity and plosive controls if necessary. The whole process will take a minute or two, and you are ready to go. The Phantom's DSP will always be there improving your sound. It's like having an engineer in every mic!The Phantom Mic Rider works with 17 to 48V phantom power sources that conform to industry standards (DIN standard 45 596 or IEC standard 268-15A). Devices that do not conform can be modified to meet the standard, or external phantom power supplies can be used.. ...details

Sabine Pro Audio > Signal Processors > Feedback Suppression >

Sabine FBX SOLO SM820 Digital Feedback Eliminator XLR.

Let's make this loud and clear: You want more gain? Increased clarity? Automatic feedback control? Want to save some money? Sabine has the answer: The FBX-SOLO, a miniature version of the award-winning FBX-1020P Feedback Exterminator. One SOLO controls feedback on one microphone or instrument - you decide which inputs get precision, automatic feedback control and maximum gain, from one channel to all your channels. New features of the SOLOs include increased headroom, a programmable noise gate, & switchable input/output levels for more versatility.The FBX-SOLO targets feedback without taking a big chunk out of your sound. Digital FBX filters are 10 times narrower than graphic EQ filters. You get back over 90% of the power you lose with a graphic EQ.Like all the FBX Feedback Exterminators, the FBX-SOLO does what no other audio product can do: it automatically detects and eliminates feedback while leaving the sound crystal clear. The patented algorithm distinguishes music from feedback so it works even during the program, not just at setup time.If you use your 31-band EQ just to shape your sound and let your FBX control feedback, you should expect up to 9 dB more gain and a dramatic improvement in the sound quality. Why? When you pull down a graphic EQ slider to chase feedback, you also pull out a big chunk of your sound. FBX constant-Q filters are 10 times narrower than graphic EQ filters. Narrow filters mean more gain and more clarity. It's that simple.The perfect solution for wireless mics Using the Sabine FBX-SOLO with a wireless mic, you'll be able to move freely without worrying about feedback. Patch it in your monitors and they'll be so loud you may have to turn them down. Get the volume you want with your acoustic/electric instrument or harmonica mic and keep that rich tone. And the built-in noise gate provides the control you need in multi-mic locations like conference rooms and courthouses. Wherever you have an open microphone, the FBX is the most effective and least expensive way to make a dramatic improvement in your sound system.How It Works: Precisely detects feedback frequency Places super-narrow (1/10 octave) digital filter directly on feedback Sets filter just deep enough to remove feedbackWhat You Get: More gain... for the first time you'll have to turn down the monitors! Increased clarity and intelligibility - narrow filters get the feedback and leave your sound untouched Automatic feedback control - in setup and during the performance Targeted feedback control - aim the FBX where you need it mostWhich SOLO for you? This SM820 features 3-PIN XLR I/O connectors (2 high balanced), 1 K Ohm nominal input impedance, -10 dBV maximum input/output level at lowest gain, a -15 to +20dB gain range at high output, and 48V switch selectable phantom power.The SL820, by contrast, features 1/4" TRS I/O connectors, unbalanced >1 meg Ohm input impedance, +20 dBV maximum input/output level at lowest gain, a 0 to +35 dB (hig. ...details

Sabine Accessories > Power Essentials > Power Supplies > Guitar and Bass Effects Power Supplies >

Sabine NEX-Power Power Supply for NEX Series.

The NEX-Power can run up to 6 NexFX pedals (each NexFX pedal comes with its own Power Patch Cord).. ...details

Sabine Pro Audio > Signal Processors > Equalizers >

Sabine Graphi-Q2 Multi-Function EQ 2X2.

The Graphi-Q2 combines 8 indispensable audio products into one very affordable, all-digital package with an easy-to-use hands-on interface. With the touch of a fader you can shape your frequency response using the GRQ2's 31-band digital graphic EQ. Need more control? Use the parametric EQ to control your filter width, depth and frequency. Time-align your speakers with the digital delay. Manage your system gain with the GRQ2 digital compressor/limiter. Finally, add 3 to 9dB of extra gain and automatic feedback control with Sabine's patented FBX technology.This interface has an instant hands-on, front panel control. RS-232 remote computer control, 20 onboard program memories, and remote switching via contact closures are standard. The Graphi-Q2 gives you a high level of control and superb audio quality at a low price.No Limits on DSP Power. You will never run out of DSP power because all Sabine Graphi-Q2 functions run concurrently. Set as many filters as you need, and add as much gain management and delay as the job requires. There are no meters showing DSP usage, because you will never run out of power.Sabine's 24-bit A/D and D/A give the cleanest audio possible, and Analog Devices' 32-bit floating-point SHARC digital processor powers every GRQ2, allowing simultaneous use of these eight essential functions:31-band digital grahic EQ, with 6 or 12 dB range The interface has the patented FBX Feedback Exterminator: up to 12 FBX SmartFilters with Quick & Quiet Setup Mode Parametric Filters, up to 12 with full graphic editing High- and low-cut filters Crossover: 1x2, with Bessel, Linkwitz-Reily, and Butterworth filters, slopes to 48 dB Limiter: Full-featured, including hard limiting for speaker protection Compressor: Full-featured, switchable to stereo or mono Delay: up to 1 second delay, adjustable in 20 microsecond incrementsUpgraded Graphi-Q2 Features: Crossover: Perfect for speaker control in mains and monitors Mixed control for the front panel: Selectively enable control for each function on the front panel GRQ2 Remote Software: Compatible with all versions of Graphi-Qs Channel-specific preset save and recall: Create presets to apply to either channel, or both Graphic Editing of Parametric Filters: Real-time filter drawing GRQ2 Remote Software: Compatible with all versions of Graphi-QsFlexible Control Front panels: The GRQ-3122 provides a hands-on, "analog style" front panel control for your digital graphic EQ, high- and low-cut filters, FBX, Compressor, and Delay. Sabine's Tweek 'n' Peek gives you an instant readout of your every move on the front panel.The GRQ2 digital delay provides precise speaker alignment, with 20-microsecond resolution, at the touch of a button. And you get dedicated bypass switches for FBX, EQ and Delay with built-in LED indicators.Sabine's Graphi-Q2 Remote Control Software gives you instant access to all front panel controls and to an additional layer of functions. You can view and. ...details

Sabine Accessories > Practice and Performance Aids > Tuners and Metronomes > Tuners >

Sabine Zoid Clip On Tuner for Band and Orchestra Instruments.

The Zoid Clip-On Tuner for Band & Orchestra Instruments is an amazingly simple chromatic tuner that'll help get your gear in tune in no time. Just clip it on to your instrument, and the Zoid instantly displays the note you play. The bright, two-color LCD display with its high-resolution needle and big note indicator tells you exactly what note you are playing and if you are flat or sharp with a ±50 cent indication. If the LCD fires bright green, you are in-tune. If you are in the red, the needle lets you know if you're flat or sharp. With the Zoid, you can either tune using the clip that transfers the note directly to the tuner—great for noisy rooms—or tune with the built-in mic if you want to tune up several instruments at once. This model has a transpose mode which displays notes for keys of C, Bb, Eb, and F. It also has a 7-octave tuning range for a wide variety of instruments, with a 3-minute auto-shutoff when it receives no signal.This professional instrument tuner is backed by Sabine's 2-year warranty.. ...details

Sabine Accessories > Practice and Performance Aids > Tuners and Metronomes > Tuners >

Sabine Zoid Clip On Tuner for Stringed Instruments.

The Zoid Clip-On Tuner is an amazingly simple chromatic tuner that'll get your guitar, bass, or other stringed instrument in tune in no time. Just clip it on to your instrument, and the Zoid displays the note you play. The bright, two-color LCD display with its high-resolution needle and big note indicator tells you exactly what note you are playing and if you are flat or sharp with a ±50 cent indication. If the LCD fires bright green, you are in-tune. If you are in the red, the needle lets you know if you're flat or sharp. With the Zoid tuner, you can either tune using the clip that transfers the note directly to the tuner—great for noisy rooms—or tune with the built-in mic if you want to tune up several instruments at once. It has a 7-octave tuning range for a wide variety of instruments, with a 3-minute auto-shutoff when it receives no signal.This professional instrument tuner is backed by Sabine's 2-year warranty.. ...details